The modular sensor platform for Home Assistant.
Pick your power. Choose your modules. Install once, expand forever.
Most smart sensors weren't built for real installs.
USB dongles dangling from outlets. Sensors that can't go on ceilings. All-in-one devices packed with features you don't need — and missing the ones you do. If you're serious about Home Assistant, you need something better.
One platform. Your configuration.
Power Your Way
PoE for single-cable installs. AC mains for permanent mounting. USB-C for flexibility. No more wall warts everywhere.
Modules That Snap
Start with presence. Add air quality later. Or go all-in from day one. Your Core, your choice.
Ceiling or Wall
Wall Core for fan control and accessibility. Ceiling Core for discreet, room-wide sensing. Same modules fit both.
Four modules. Endless automations.
Presence Module
Dual mmWave radar (C4001 + LD2450)
- Room occupancy detection
- Multi-target tracking
- Zone-based sensing
- Works through furniture, even detects breathing
Perfect for: Lighting automation, HVAC control, security
AirIQ Module
Full air quality suite (SEN55 + optional sensors)
- PM1 / PM2.5 / PM4 / PM10 | VOC | NOx index
- CO₂
- CO, NO₂ and gas detection
- Optional: CO₂, ozone, formaldehyde
Perfect for: Bedrooms, offices, workshops, anywhere air matters
Comfort Module
Environmental essentials
- Temperature
- Humidity
- Light level (lux)
- Barometric pressure
Perfect for: Climate control, sleep automation, energy optimisation
Fan Module
Automated ventilation control
- PWM fan speed control
- Works with AC Infinity and others
- Trigger on air quality thresholds
- Silent or boost modes via HA
Perfect for: Grow rooms, workshops, server closets, DIY purifiers
From box to Home Assistant in four steps.
Choose Your Core
Wall or Ceiling. Pick PoE, mains, or USB power.
Add Your Modules
Presence, AirIQ, Comfort, Fan — snap in what you need.
Flash via Browser
Visit WebFlash. Select your config. Done in 60 seconds. No code.
Adopt in Home Assistant
Auto-discovered via ESPHome. Blueprints included for instant automation.
PoE changes everything.
One Ethernet cable. Power and data. No wall adapters, no USB hubs, no mess. Run Cat6 to your ceiling, mount the Core, and forget about it. This is how smart homes should be wired.
| Feature | Typical Sensors | Sense360 |
|---|---|---|
| Power | USB only | PoE / Mains / USB |
| Mounting | Desk or outlet | Ceiling or wall |
| Expandable | No | Yes — add modules anytime |
| Sensors | Fixed | Modular — your choice |
Real automations. Not gimmicks.
Presence → Lighting
Lights on when you enter. Off when the room is truly empty — not just still. mmWave knows the difference.
Air Quality → Ventilation
CO₂ hits 1000ppm? Fan kicks in. PM2.5 spikes while cooking? Boost mode. All automatic.
Comfort → Climate
Too humid? Trigger the dehumidifier. Too dark? Adjust the blinds. Temperature drops? Nudge the thermostat.
Your data stays home.
Not sure where to start?
Grab a bundle. Everything you need to get sensing.
Presence Starter
- Ceiling Core (PoE)
- Presence Module
- Dual mmWave sensors (C4001 + LD2450)
- Mounting hardware
- LED Ring
- Pre-flashed, HA-ready
Air Quality Starter
- Celling Core (PoE)
- AirIQ Module (SPS30)
- Temperature, humidity, PM, VOC, NOx
- Mounting hardware
- LED Ring
- Pre-flashed, HA-ready